Merchandise Description
Item Description
Main Characteristics:
one) Produced of high top quality aluminum alloy, gentle fat and non-rusting
two) Massive output torque and substantial radiating efficiency
3) Easy working and lower noise, can work extended time in dreadful issue
4) Excellent-looking physical appearance, resilient support daily life and small volume
five) Suitable for omnibearing set up
Principal Resources:
1)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(size one hundred ten-a hundred and fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make gear floor hardness up to fifty six-62 HRC After precision grinding, carburization layer’s thickness between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Combination Options:
Input:with input shaft, With sq. flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic protect
Worm reducers are offered with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Computer, NMRV+UDL, NMRV+MOTORS
In depth Images
Solution Parameters
Old Model | New Model | Ratio | Center Distance | Electrical power | Enter Dia. | Output Dia. | Output Torque | Excess weight |
RV571 | 7.5~100 | 25mm | .06KW~.12KW | Φ9 | Φ11 | 21N.m | .7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | .06KW~.25KW | Φ9(Φ11) | Φ14 | 45N.m | one.2kgs |
RV040 | RW040 | seven.5~100 | 40mm | .09KW~.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | seven.5~a hundred | 50mm | .12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~one hundred | 63mm | .18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | .25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~one hundred | 90mm | .37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | thirteen.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | .55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | seven.5~100 | 130mm | .75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | forty eight.0kgs |
RV150 | RW150 | seven.5~one hundred | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | eighty four.0kgs |
Exploded See:
GMRV Define Dimension:
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | eighty | 97 | fifty four | 44 | 14 | fifty five | 32 | fifty six | sixty three | sixty five | 29 | 55 | forty | 57 | 30 | seventy five | forty four | six.five | 21 | five.5 | M6*10(n=4) | 0° | five | 16.3 | 27 |
040 | a hundred | 121.five | 70 | 60 | 18(19) | sixty | 43 | 71 | 78 | seventy five | 36.five | 70 | 50 | 71.five | forty | 87 | fifty five | 6.five | 26 | 6.5 | M6*ten(n=4) | 45° | six | 20.8(21.8) | 35 |
050 | a hundred and twenty | one hundred forty four | 80 | 70 | twenty five(24) | 70 | forty nine | 85 | ninety two | eighty five | forty three.five | 80 | 60 | eighty four | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | one hundred forty four | 174 | one hundred | 85 | 25(28) | 80 | 67 | 103 | 112 | ninety five | fifty three | 95 | 72 | 102 | sixty three | a hundred and ten | 80 | eight.five | 36 | 8 | M8*12(n=8) | 45° | eight | 28.3(31.3) | fifty |
075 | 172 | 205 | one hundred twenty | 90 | 28(35) | ninety five | 72 | 112 | 120 | 115 | fifty seven | 112.5 | 86 | 119 | 75 | 140 | 93 | eleven | forty | ten | M8*fourteen(n=8) | 45° | eight(ten) | 31.3(38.3) | sixty |
090 | 206 | 238 | a hundred and forty | a hundred | 35(38) | one hundred ten | 74 | one hundred thirty | one hundred forty | one hundred thirty | 67 | 129.five | 103 | 135 | 90 | a hundred and sixty | 102 | thirteen | 45 | 11 | M10*16(n=8) | 45° | ten | 38.3(41.3) | 70 |
a hundred and ten | 255 | 295 | a hundred and seventy | one hundred fifteen | forty two | one hundred thirty | – | 144 | one hundred fifty five | one hundred sixty five | seventy four | a hundred and sixty | 127.5 | 167.five | 110 | two hundred | a hundred twenty five | 14 | fifty | fourteen | M10*eighteen(n=8) | 45° | twelve | forty five.3 | 85 |
a hundred thirty | 293 | 335 | 200 | 120 | forty five | a hundred and eighty | – | a hundred and fifty five | one hundred seventy | 215 | 81 | 179 | 146.five | 187.five | a hundred thirty | 250 | 140 | sixteen | 60 | 15 | M12*twenty(n=8) | 45° | fourteen | 48.8 | one hundred |
a hundred and fifty | 340 | four hundred | 240 | one hundred forty five | fifty | a hundred and eighty | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | one hundred fifty | 250 | one hundred eighty | 18 | 72.five | eighteen | M12*22(n=8) | 45° | 14 | fifty three.eight | 120 |
Firm Profile
About CZPT Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our top merchandise is full selection of RV571-one hundred fifty worm reducers , also provided GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer units, UDL Variators and AC Motors, G3 helical gear motor.
Items are extensively utilised for apps this sort of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-generating, building machinery, metallurgic mine, environmental security engineering, and all kinds of computerized lines, and assembly lines.
With rapidly shipping, superior after-revenue services, advanced producing facility, our goods sell well both at house and overseas. We have exported our reducers to Southeast Asia, Japanese Europe and the Center East and so on.Our purpose is to create and innovate on the foundation of large quality, and generate a good status for reducers.
Workshop:
Exhibitions:
We take part Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Get Eurasia
Packaging & Delivery
Packing details:Plastic Bags+Cartons+Wooden Instances , or on request
Set up Guidelines
To put in the reducer, it is necessary to note the following troubles:
1)Check the correct rotation route of output shaft ahead of fitting reducer to machines.
two)Ahead of mounting, pls examine shaft diameter, bore diameter, crucial and keyway, to be confident their dimension are not deviation In get to hold good overall performance, also pls avoid assembling as well limited or too unfastened.
3)Reducer need to be mounted to machines stably to avoid vibration.
4)Whenever feasible,defend the reducer from solar radiation and bad temperature.
5)In the scenario of especially lengthy interval of storage(4-6 months), if the oil seal is not immersed in lubricant within the device, it is recommended to alter it given that the rubber could stick to the shaft or might even have missing the elasticity.
6)Portray must absolutely not go in excess of rubber areas and the holes on breather plug if any.
seven)When link with hollow or strong shaft, pls grease the joint to steer clear of lock or oxidation.
8)Examine the appropriate lubricant stage via indicator if there is 1.
nine)Commencing must just take spot steadily, without having instantly implementing the maximum load.
10)When employing a variety of of motors to match reducer directly, supporting unit is needed if motor is too hefty.
11)Make certain great heat dissipation by keeping great air flow close to the motor enthusiast.
twelve)In the scenario of ambient temperature40ºC, pls contact the specialized division.
Soon after Revenue Services
1.Servicing Time and Warranty:Within 1 12 months right after receiving items.
two.Other Services: Like modeling variety information, installation information, and difficulty resolution manual, etc.
FAQ
one.Q:Can you make as per buyer drawing?
A: Sure, we offer you personalized provider for clients accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit ahead of generation,balance T/T before shipping.
3.Q:Are you a trading organization or producer?
A:We are a manufacurer with superior gear and skilled staff.
4.Q:What is actually your manufacturing ability?
A:8000-9000 PCS/Month
five.Q:Totally free sample is obtainable or not?
A:Yes, we can source totally free sample if customer concur to shell out for the courier expense
6.Q:Do you have any certification?
A:Indeed, we have CE certificate and SGS certification report.
Contact information:
Ms Lingel Pan
For any questions just feel cost-free ton get in touch with me. A lot of many thanks for your sort consideration to our organization!
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Step: | Double-Step |
Ratio: | 7.5-100 |
###
Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
US $12-220 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Right Angle |
Step: | Double-Step |
Ratio: | 7.5-100 |
###
Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Old Model | New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
RV025 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
###
GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
050 | 120 | 144 | 80 | 70 | 25(24) | 70
Tags
|