China Standard Reducer, Worm Gear Reducer, Speed Reducer Gearboxes High Speed Gearbox Reducer Nmrv-030-5-5614 components of gearbox

Product Description

Reducer, Worm Gear Reducer, Speed Reducer Gearboxes High Speed Gearbox Reducer NMRV-030-5-5614

Product Description

Type

Reduction gearbox

Rated power

3KW/4KW/5.5KW/7.5KW/11KW

Product name

Gearbox

Model

NMRV150

Material

Cast iron

Features

Conveyor belt/transportation/industrial, small size, high heat dissipation, smooth transmission, low noise

Technical performance and selection reference

Motor power

Model

speed ratio

output speed

output toruqe

 

0.25kw 1400rpm

RV075

60

24rpm

68.0N.M

RV075

80

18rpm

80.0N.M

RV075

100

14rpm

94.0N.M

 

0.37kw 1400rpm

RV075

40

35rpm

74.0N.M

RV075

50

28rpm

88.0N.M

RV075

60

24rpm

97.0N.M

RV075

80

18rpm

119.0N.M

RV075

100

14rpm

139.0N.M

 

 

 

0.55kw 1400rpm

RV075

25

56rpm

76.0N.M

RV075

30

47rpm

87.0N.M

RV075

40

35rpm

108.0N.M

RV075

50

28rpm

128.0N.M

RV075

60

24rpm

144.0N.M

RV075

80

18rpm

177.0N.M

RV075

100

14rpm

206.0N.M

 

 

 

0.75kw 1400rpm

RV075

15

94rpm

66.0N.M

RV075

20

70rpm

85.0N.M

RV075

25

56rpm

101.0N.M

RV075

30

47rpm

117.0N.M

RV075

40

35rpm

147.0N.M

RV075

50

28rpm

174.0N.M

RV075

60

24rpm

196.0N.M

RV075

80

18rpm

250.0N.M

 

 

 

 

1.1kw 1400rpm

RV075

10

140rpm

66.0N.M

RV075

15

94rpm

95.0N.M

RV075

20

70rpm

122.0N.M

RV075

25

56rpm

148.0N.M

RV075

30

47rpm

171.0N.M

RV075

40

35rpm

216.0N.M

RV075

50

28rpm

263.0N.M

RV075

60

24rpm

297.0N.M

 

 

1.5kw 1400rpm

RV075

7.5

186rpm

68.0N.M

RV075

10

140rpm

89.0N.M

RV075

15

94rpm

129.0N.M

RV075

20

70rpm

166.0N.M

RV075

25

56rpm

202.0N.M

RV075

30

47rpm

233.0N.M

RV075

40

35rpm

299.0N.M

 

 

2.2kw 1400rpm

RV075

7.5

186rpm

99.0N.M

RV075

10

140rpm

131.0N.M

RV075

15

94rpm

189.0N.M

RV075

20

70rpm

249.0N.M

RV075

25

56rpm

304.0N.M

RV075

30

47rpm

247.0N.M

3.0kw 1400rpm

RV075

7.5

186rpm

135.0N.M

RV075

10

140rpm

178.0N.M

RV075

15

94rpm

258.0N.M

4.0kw 1400rpm

RV075

7.5

186rpm

180.0N.M

RV075

10

140rpm

237.0N.M

Specification

Product name

SNRV worm gear reducer

Ratio

5,7.5,10,15,20,25,30,40,50,60,80,100

Input power

0.25~4.0 KW

Color

Blue/Silver/Black or on Request

Weight

9 Kg

 

 

Material

571-105 aluminum alloy, 110-150 cast iron

The worm material is 20Cr carburized and quenched, the surface hardness reaches 58-62 degrees, and after processing, the
carburized layer retains a depth of 0.3-0.5mm

Worm gear hub ductile iron QT500, tooth tin bronze ZQSN10-1

Oil seals

CHINAMFG

 

Input form

SMRV : fitted for motor flanged coupling

SMRV:The tail of the worm has an extension shaft

SRV: with input shaft

SRV-E : With bidirectional input shaft worm

Suitable motor pole

2pole,4pole,6pole

Inch size

Available

Personal customization

Available

Extra service

OEM

Quality Assurance

1 year

 

 

 

Features

High precision, smooth transmission, large output torque, low noise, long service life

Suitable for omni-directional installation

Can be easily mounted with various accessories like torque arms, different types of flanges, shafts and so on

Good rust resistance

 

 

Surface coating

First, the shell is treated by surface particle blasting, and then, through special anticorrosion treatment, RAL5571 blue plastic
powder or A7205 white plastic powder is sprayed in the shell, or the color plastic powder specified by the customer is attached
tothe surface of the box body after high temperature.

After polishing and sanding, it is dried at high temperature and then sprayed with RAL5571 paint in the shell.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless
Samples:
US$ 9/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

Maintenance Tips for Prolonging the Life of a Worm Gearbox

Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:

  • Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
  • Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
  • Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
  • Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
  • Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
  • Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
  • Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
  • Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
  • Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
  • Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.

By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.

worm gearbox

Worm Gearbox vs. Helical Gearbox: A Comparison

Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:

Aspect Worm Gearbox Helical Gearbox
Efficiency Lower efficiency due to sliding friction between the worm and worm wheel. Higher efficiency due to rolling contact between helical gear teeth.
Torque Transmission Excellent torque transmission and high reduction ratios achievable in a single stage. Good torque transmission, but may require multiple stages for high reduction ratios.
Noise and Vibration Generally higher noise and vibration levels due to sliding action. Lower noise and vibration levels due to smoother rolling contact.
Backlash Higher inherent backlash due to the design. Lower backlash due to meshing of helical teeth.
Efficiency at Higher Speeds Less suitable for high-speed applications due to efficiency loss. More suitable for high-speed applications due to higher efficiency.
Overload Protection Natural self-locking feature provides some overload protection. May not have the same level of inherent overload protection.
Applications Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. Widely used in various applications including automotive transmissions, industrial machinery, and more.

Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.

worm gearbox

Lubrication Requirements for a Worm Gearbox

Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:

  • Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
  • Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
  • Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
  • Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
  • Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
  • Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
  • Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.

Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.

China Standard Reducer, Worm Gear Reducer, Speed Reducer Gearboxes High Speed Gearbox Reducer Nmrv-030-5-5614   components of gearbox	China Standard Reducer, Worm Gear Reducer, Speed Reducer Gearboxes High Speed Gearbox Reducer Nmrv-030-5-5614   components of gearbox
editor by CX 2023-12-28

Recent Posts

worm reducers

As one of leading worm reducers manufacturers, suppliers and exporters of mechanical products, We offer worm reducers and many other products.

Please contact us for details.

Mail: sales@worm-reducers.top

Manufacturer supplier exporter of worm reducers