Reducer information
- The development trend of reducer05:26 - XNUMX:XNUMX
- Ever-Power Company ZQ350-40.17-1 Cylindrical Gear Reducer08:03 - XNUMX:XNUMX
- XW6-43 cycloid reducer is assembled08:04 - XNUMX:XNUMX
- XWD4-17-4Kw cycloid reducer assembly site07:04 - XNUMX:XNUMX
- XWEDv2.2-63-319 cycloid reducer loaded and shipped08:02 - XNUMX:XNUMX
-
24
2019:07 - XNUMX:XNUMX
SWL series worm gear screw lift
The SWL series worm gear screw elevator completes the functions of lifting, lowering, advancing, turning, etc. through the worm gear drive screw. It is a basic part, listed as JB/T8809-19...
-
24
2019:07 - XNUMX:XNUMX
Advantages and disadvantages of cycloid reducer
摆线针轮减速机的优点有:1.体积小、重量轻。由于广采用行星传动结构,所以结构紧凑,与同功率的普通齿轮减速机相比,体积和重量均可减少1/2一2/3。2. ...
-
04
2019:07 - XNUMX:XNUMX
-
02
2018:08 - XNUMX:XNUMX
-
09
2017:10 - XNUMX:XNUMX
-
06
2017:10 - XNUMX:XNUMX
CWU/CWO/CWS arc gear worm reducer bearing model selection table
CWU/CWO/CWS arc tooth worm gear reducer bearing selection CWU/CWS/CWO63 worm gear reducer worm bearing model 7304 worm gear bearing model 7507CWU/CWS/...
-
06
2017:10 - XNUMX:XNUMX
Troubleshooting of XWED cycloid reducer
Common faults and troubleshooting methods of XWED planetary cycloidal pinwheel reducer XWED planetary cycloidal pinwheel reducer will often experience wear and leakage during long-term operation. The main types are: 1. X planetary cycloidal pinwheel deceleration Crankshaft...
-
06
2017:10 - XNUMX:XNUMX
Lubrication of cycloid reducer
1. The horizontal XWE planetary cycloidal pinwheel reducer adopts oil pool lubrication under normal conditions, and the oil level can be kept in the middle of the oil window. It can be lubricated by circulating lubrication when the working conditions are bad and the ambient temperature is high. 2. XWE...
-
06
2017:10 - XNUMX:XNUMX
XLED cycloid reducer installation
Installation of XLED planetary cycloidal pinwheel reducer 1. When couplings, belt pulleys, sprocket wheels, etc. are added to the output shaft of the XLED planetary cycloidal pinwheel reducer, direct hammering methods are not allowed, because the reducer The output shaft knot...