General Description
Equipped using the zero leak bidirectional checking sole-noid valves, this power unit is intended for that operation of two independent circuits. Which are respectively for that most important and subordinate platforms of the double scissors lift. Two cut-off valves are applied for reducing the machine manually in situation of power reduction. If far more independent circuits are demanded to your application please get hold of us for availability.
Remark: one. Please seek the advice of our product sales engineer for your different pump displacement, motor electrical power or tank capability.
2. CSA or UL licensed motors can be found upon request.
Particular Notes
one. 
The AC motor is of S3 duty cycle, which can only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned just before set up of the energy unit.
three. Viscosity with the oil shoud be 15~46 cst,plus the oil ought to be clean and absolutely free of impurities,N46 hydraulic oil is proposed.
four. The power unit should be mounted vertically.
five. Check the oil level inside the tank right after the preliminary operating with the power unit.
six. Oil altering is required just after the original one hundred operation hours,afterwards once each and every 3000 hrs.
Power UNITS FOR DOUBLE-SCISSORS LIFT
Tags