Ever-Power Corporation , announces its right angle NEMA gearbox designed to IP65 specifications for use in wash down applications in packaging products and comparable machinery. Rated backlash is usually 30 arc-minutes with options for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-bands shaft seals on both input and result. All fasteners are stainless. Hard anodized aluminum or 316 Stainless housings can be found. Customizing for other than NEMA motors or your unique application is quickly done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a good solution to applications that with special space but need low rate and/or high torque.
Manufacturer Part Quantity: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a electric motor with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum velocity of just a little over 900 RPM. At the result of the gearbox, the stage angle is a little under 0.35°. When using the step position in calculations, you should derive the specific step angle by dividing 1.8° by the gearbox decrease ratio.
This specific revision of the 3317 is manufactured by a different producer, but should behave very similarly to the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and may be mounted in any path with their slip fit “O” ring design. Low to high reduction ratios, flange mount or foot install types, right angle or hollow shaft right angle types available. Match NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Rate Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Swiftness Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Mount)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Install)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Swiftness vary based on input voltage and frequency, please review product specifications for details.
In comparison to a spur gear of approximately the same pitch size, Helical gears may transfer high loads at greater speeds. That is due to the gradual engagement of the teeth and soft transfer of the strain.
Lightweight and Compact
Die cast aluminum equipment housings make these rate reducers light in weight, allowing engineers to design more economical mounting provisions
High-quality synthetic grease is used in all gearboxes. They are loaded at the factory and do not need maintenance filling or level checks. This saves valuable time at create and eliminates concern for pricey oil disposal required by the EPA.
Mount in virtually any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and dual lip springtime shaft seals on both the motor and insight shaft and output shaft driver. Hence, the gear motors could be mounted in any conceivable direction without concern for the positioning of a breather connect.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes include a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of a lot of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and obtainable from solitary to three levels with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-moments. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, affordable integration