Welcome toThe official website of Cangzhou Ever-Power Deceleration Machinery Co., Ltd.!

Reducer information

contact us

Contact Us

Reducer manufacturers > Gear reducer > ZQ cylindrical gear reducer
  • product name: ZQ cylindrical gear reducer

  • product type: Gear reducer

  • Product number:

  • release time: 2017-10-09

product description

ZQGear reducer features and scope of application
ZQ typeReducerMainly used in lifting, mining, general chemical, textile, light industry and other industries, and its applicable conditions are as follows:
1. The circumferential speed of the gear transmission of the reducer is not more than 10 m/s;
2. The speed of the high-speed shaft of the reducer is not more than 1500 rpm;
3. The reducer is used for forward and reverse rotation;
4. The working environment temperature of the reducer is -40℃ to +40℃
ZQGear reducer structure
ZQGear reductionThe machine has two-stage transmission, and there are nine assembly types. The input shaft extension is conical, and the output shaft end is cylindrical (Z type), gear type (CA type, C type) and first-level Euclid (cross slide) coupling.器(F type).
ZQGear reducer specifications speed ratio
ZQGear reducer中心距有: ZQ250、ZQ350、ZQ400、ZQ500、ZQ650、ZQ750、ZQ850、ZQ100
ZQ齿轮减速机传动比有: 48.57、40.17、31.5、23.34、20.49、15.75、12.64、10.35、8.23 。
ZQGear reducerInstallation, use and maintenance
1. The gear is lubricated by a closed transmission oil tank. The oil level of the lubricating oil is indicated by the circular oil mark on the base. When the reducer is in a stopped state, the oil level is within the range indicated by the oil mark.
3. Pay special attention to the cleaning of the oil in the early stage of the reducer's work. If the oil is soiled (especially the mixing of metal foam), the oil should be changed immediately. While changing the oil, the dirt in the body should be removed.The quality of the oil must be checked regularly (not less than once every six months).
4. The state of the meshing working surface should be checked regularly, especially when the tooth surface is scratched at the beginning of the work, if the area occupied by the scratch is not more than 20% of the tooth working surface (along the tooth length and tooth height), it is allowed to use Whetstone or scraper is slightly trimmed.
5. If you need to open the cover for maintenance, pay attention to the cover

ZQ cylindrical gear reducer

Whether there is sealant applied, if there is sealant, use the screw hole on the cover to open it with a screw. Do not hammer the sealing surface. After the overhaul, check the sealing surface and the through cover for scratches, and clean the sealant residue. Isn't it clean, or it will cause oil leakage?

Other reducer
[HOME] [ Previous ] [ next ]
Processed in 0.013196 Second.