1. Horizontal XWE planetCycloid reducerUnder normal conditions, the oil pool is used for lubrication, and the oil level is kept in the middle of the oil window. When the working conditions are bad and the ambient temperature is high, the circulating lubrication can be used.
2,XWE planetary cycloid cycloidal pinwheel reducer40# or 50# mechanical oil lubrication is generally used at normal temperature. In order to improve the performance of the reducer and extend the service life of the cycloid reducer, it is recommended to use 70# or 90# extreme pressure gear oil to work under high and low temperature Lubricating oil should also be reconsidered at this time.
3. The vertical installation of the X planetary cycloid reducer should strictly prevent the oil pump from cutting off the oil to avoid damage to the parts of the reducer.
4. When refueling, you can turn the breather cap on the upper part of the seat to refuel.When draining the oil, turn the drain plug at the bottom of the main seat to drain the dirty oil.There is no lubricating oil inside the reducer when it leaves the factory.
5. New oil should be replaced after 100 hours of refueling operation for the first time, (and the internal dirty oil should be cleaned), and then continue to work afterwards. Replacement every six months (8-hour work system). If the working conditions are bad, the oil change time can be shortened appropriately. Frequent cleaning and oil change of the reducer (such as 3-6 months) play an important role in extending the service life of the reducer.Lubricating oil should be replenished frequently during use.