ep

December 28, 2020

The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nevertheless, in response on the demands for smaller sized chains in recent years for higher technological innovation machinery such as workplace equipment, healthcare machines and industrial robots, we give 15 of four.7625 mm (3/16 inch) pitch and in addition 15H1 as a high-power edition of 15. These higher precision chains are produced under serious high-quality control especially demanded for modest sizes, taking dress in resistance also under consideration.
Collection of chain
Refer on the “Low-speed selection”. Nonetheless, the chain operation pace could be set considerably higher based on the kind of lubrication as proven from the table beneath.
Connecting links and offset hyperlinks
R connecting links are made use of for modest pitch chains. Even so, since their power is reduced than that of your base chain, and since the clip is prone to come off in substantial pace operation, the use of connecting back links isn’t suggested. Use a loop chain devoid of attaching connecting hyperlinks.
Offset backlinks are available for chains aside from 15 and 15H1, but their use is not advisable to the very same motive as stated for that R Connecting hyperlinks.
Working speed and type of lubrication
15: A high precision mini-pitch bushing chain that’s smaller sized than a compact drive chain for standard applications, 25
25: Smallest bushing chain amongst ANSI standard chains utilizing curl bushings.
35: A ANSI typical bushing chain appropriate for small precision machines that require substantial strength.